Home » Sklep » Używany » Wzmacniacze » Amplifier Research 250TR1G2Z5

Amplifier Research 250TR1G2Z5

Wzmacniacz RF 1 – 2,5 GHz 250 W.

Producent:
Model: Amplifier Research 250TR1G2Z5
Opis: Wzmacniacz RF 1 - 2,5 GHz 250 W.
Arkusz danych PDF: Amplifier Research 250TR1G2Z5
Add to Quote Cart
Cart updated.
Continue shopping
or
go to your quote cart

Amplifier Research 250TR1G2Z5 (call for availability)The Amplifier Research (AR) 250TR1G2z5 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for applications where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 250 watts minimum at the amplifier output connector. Stated power specifications are at the fundamental frequency.The AR 250TR1G2z5 Amplifier’s front panel digital display shows forward and reflected output plus extensive system status information accessed through a series of menus via soft keys. Status indicators include power on, warm-up, standby, operate, faults, excess reflected power warning and remote. Standard features include a built-in IEEE-488 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, plus monitoring of TWT helix cur, cathode voltage, collector voltage, heater cur, heater voltage, base plate temperature and cabinet temperature. The modular design of the AR 250TR1G2z5 Amplifier’s power supply and RF components allow for easy access and repair. Use of a switching mode power supply results in significant weight reduction.The AR 250TR1G2z5 Amplifier is designed for 19 inch rack mounting, offers four side mounted carry handles, plus non-slip feet for bench top use. The AR 250TR1G2z5 Amplifier provides readily available RF power for a variety of applications in Test and Measurement, (including EMC RF susceptibility testing), Industrial and University Research and Development, and Service applications. Features and Specifications of the AR 250T1G3 Amplifier include:

  • Power (fundamental), CW, @ Output Flange:
    • Nominal: 300 watts
    • Minimum: 250 watts
  • Flatness: ±12 dB maximum
  • Frequency Response: 1-2.5 GHz instantaneously
  • Input for Rated Output: 1.0 milliwatt maximum
  • Gain (at maximum setting): 53 dB minimum
  • Gain Adjustment (continuous range): 35 dB minimum
  • Input Impedance: 50 ohms, VSWR 2.0:1 maximum
  • Output Impedance: 50 ohms, VSWR 2.5:1 typical
  • Mismatch Tolerance: Output power fold back protection at reflected power exceeding 50 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
  • Modulation Capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
  • Noise Power Density: Minus 72 dBm/Hz maximum, Minus 77 dBm/Hz typical
  • Harmonic Distortion: Minus 3 dBc maximum, Minus 4.5 dBc typical
  • Primary Power: 190 – 260VAC, 50/60 Hz single phase, 2.5 KVA maximum
  • Connectors:
    • RF input: Type N female on rear panel
    • RF output: Type N female on rear panel
    • RF output sample port: Type N female on rear panel
    • GPIB: IEEE-488 (f) on rear panel
    • Interlock: DB-15 (f) on rear panel
  • Cooling: Forced air (self contained fans), air entry and exit in rear.
  • Nominal: 300 watts
  • Minimum: 250 watts
  • RF input: Type N female on rear panel
  • RF output: Type N female on rear panel
  • RF output sample port: Type N female on rear panel
  • GPIB: IEEE-488 (f) on rear panel
  • Interlock: DB-15 (f) on rear panel

    •     

    Amplifier Research 250TR1G2Z5 Product Overview