Haefely PSURGE 4010

HAEFELY PSURGE 4010 Generator (call for availability)The Haefely PSURGE 4010 Combination Wave Surge Generator is a one box solution for:

IEC / EN 61000-4-5 Edition 1 and 2

EN 61000-6-1

EN 61000-6-2

Surge voltage transients are caused by switching and lightning effects. The Haefely PSURGE 4010 allows evaluation of the performance of equipment when subject to highenergy disturbances on power and interconnection lines.Features of the Haefely PSURGE 4010 include:

Combination wave Voltage:

• 1,2/50us
• Cur: 8/20us

Impulse voltage: 200V ... 4.2kV

• Impulse cur: 100A ... 2.1kA
• Maximum impulse repetition rate 12 per minute
• Positive, negative and user definable alternating polarity
• Integrated CDN for 16A at 264Vac and 110Vdc
• Impulse voltage, cur and EUT cur measurement
• Test parameter ramp functions
• Phase angle synchronization
• 18 test and 18 program memory locations
• Remote control using WinFEAT&R©

1,2/50us

Cur: 8/20us

Impulse cur: 100A ... 2.1kA

Maximum impulse repetition rate 12 per minute

Positive, negative and user definable alternating polarity

Integrated CDN for 16A at 264Vac and 110Vdc

Impulse voltage, cur and EUT cur measurement

Test parameter ramp functions

Phase angle synchronization

18 test and 18 program memory locations

Remote control using WinFEAT&R©

Benefits of the Haefely PSURGE 4010 include:

Totally reproducible test results

Consistent pulse parameters

Fully automatic execution of complex test routines and sequences

Cost effective solution

Expandable to 3 phase testing with FP-SURGE 32.1

Expandable to impulse magnetic field testing (IEC 61000-4-9) with MSURGE

Technical Specifications of the Haefely PSURGE 4010 include:

Waveshape 1,2/50us and 8/20us according to IEC 61000-4-5

Impulse Voltage 200V ... 4.2kV

Impulse Cur 100A ... 2.1kA

Impulse Repetition Up to 12 per minute

Impulse Polarity Positive, Negative, Alternating

Power supply 85V ... 264V, 50/60Hz

Internal single-phase CDN

• max. AC power 264V / 16A, 50-60Hz on Schuko plug
• max. DC power 110V / 16A
• Coupling mode 18uF and 9uF+10O / acc. to IEC 61000-4-5

max. AC power 264V / 16A, 50-60Hz on Schuko plug

max. DC power 110V / 16A

Coupling mode 18uF and 9uF+10O / acc. to IEC 61000-4-5

The internal microprocessor, and intelligent user interface making use of main function hard-keys, makes this device very user friendly. The following points further increase user flexibility :

Programmable and variable parameters make PSURGE 4010 ideal for development and quality engineers.

Permanent storage of tests and programs

Alphanumeric input

Multi-mode LCD display

Test report generated directly to a printer without using an external computer

Easy remote control programming with an external computer and WinFEAT&R software

The PSURGE 4010 generator is fully compliant to the IEC requirements. A solid state high voltage switch provides very accurate reproducible tests, long life expectancy and accurate phase synchronisation. Product quality is enhanced by:

An integrated cur protected couplingdecoupling network

Decoupling inductors that maintain the impulse waveform

Integrated high performance peak measurements of impulse voltage and cur

Safety circuit and emergency stop circuit provide high personnel protection

High flexibility and operation of tests is achieved through:

Fully automatic test sequences

EUT failure detection and protection by programmable cur limits

EUT failure detection with integrated “EUT Failed” input connector

Centronix interface for printer

A serial RS-232 interface enable operation from a computer

Expansion into an automatic 3-phase system

Possibility to fulfil IEC 61000-4-9 with an optional coil antenna