Agilent / HP E4362A Solar Array Simulator DC Module (call for availability)The Agilent / HP E4362A is a 600W Solar Array Simulator DC Power Module that simulates the output characteristics of a solar array. The Agilent / HP E4362A Solar Array Simulator DC Module is primarily a cur source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of diffe solar arrays under various environmental conditions (ie., temperature, age, eclipse, spin etc.). The Agilent / HP E4362A Solar Array Simulator DC Module gives you the flexibility to operate it in two ways:

Input the four key operational parameters (Voc, Isc, Vmp, Imp) needed for the Solar Array Simulator to internally create an I-V curve of a solar array

Download a user defined table for the I-V curve of the solar array

Features and Specifications of the Agilent / HP E4362A Modular Solar Array Simulator DC Module include:

Output Ratings (Simulator and Table Modes):

• Maximum Power:  600 W
• Maximum Open Circuit Voltage (Voc): 130 V
• Maximum Voltage Point (Vmp): 120 V
• Line Voltage 200 V / 230 V / 240 V:
• Maximum Short Circuit Cur (Isc) : 5.0 A
• Maximum Circuit Point (Imp): 5.0 A
• Line Voltage: 100 V / 120 V:
• Maximum Short Circuit Cur (Isc) : 2.5 A
• Maximum Circuit Point (Imp) : 2.5 A

Output Ratings (Fixed Mode):

• Voltage: 0 – 120 V

• Line Voltage: 200 V / 230 V / 240 V:
• Cur: 0 – 5.0 A

• Line Voltage: 100 V / 120 V:
• Cur: 0 – 2.5 A

Cur Derating Factor (from 40°C to 55°C): 0.069 A/°C

Output Voltage Ripple & Noise (from 20 Hz to 20 MHz with a resistive load, outputs ungrounded, or either output grounded):

• Simulator / Table Mode:
• 24 mVrms
• 195 mVp-p
• Fixed Mode (constant voltage):
• 30 mVrms
• 150 mVp-p

Programming Accuracy (@ 23°C ±5°C):

• Fixed Mode Voltage: 0.075% + 50 mV
• Fixed Mode Cur: 0.2% + 10 mA

Readback Accuracy (from front panel or over GPIB with respect to actual output @ 23 ±5°C):

• Voltage: 0.08% + 50 mV
• +Cur: 0.20% + 10 mA
• -Cur 0.35% + 24 mA

Load Regulation – Fixed Mode (change in output voltage or cur for any load voltage change within ratings):

• Constant Voltage: 2 mV
• Constant Cur: 1 mA

Line Regulation – Fixed Mode (change in output voltage or cur for any line voltage change within ratings):

• Constant Voltage: 2 mV
• Constant Cur: 1 mA

Output Cur Ripple & Noise (from 20 Hz to 20 MHz with a resistive load, outputs ungrounded, or either output grounded):

• Simulator/Table Mode:
• 4 mArms
• 32 mAp-p
• Fixed Mode (constant cur):
• 2.5 mArms
• 19 mAp-p

Output Programming Range (maximum programmable values):

• Simulator/Table Mode Voltage: 0 – 130 V
• Fixed Mode Voltage: 0 – 123 V
• Line Voltage: 200 V / 230 V / 240 V:
• Cur: 0 – 5.1 A
• Line Voltage: 100 V / 120 V:
• Cur: 0 – 2.55 A
• Overvoltage Protection: 0 – 140 V
• Overcur Limit: 0 – 6.25 A

Programming Resolution (average values):

• Voltage: 37 mV
• Cur: 1.6 mA
• Overvoltage Protection: 600 mV
• Overcur Limit: 27 mA

Programming Accuracy:

• Overvoltage Protection: 1.2 V
• Overcur Limit: 0.5% + 215 mA
• Cur Monitor (referenced to P common): 1.0% + 75 mA

Fixed Mode Analog Cur Programming:

• Analog Programming: 1.0% + 3.2 mA
• +Ip to -Ip Diffeial Input (0 to full scale): 0 to -4 V
• Maximum Common Mode Voltage (referenced to +OUT): ±18 V
• Nominal Input Impedance: 20 kO

Drift / Temperature Stability (change in output over 8 hours underconstant load, line, and ambient, following a 30 minute warmup):

• Voltage: 0.04% + 2 mV
• Cur: 0.1% + 0.5 mA

Temperature Coefficients (output change per °C):

• Voltage 0.01% + 650 µV
• Cur 0.025% + 125 µA

Output Capacitance:  < 50 nF

Maximum Reverse Diode Cur (with fans running): 5.0 A

Output Cur Settling Time (output recovery to within 1.5 A of an operating point on the I-V curve (V < 90% of VMP) after switching from a short circuit to a fixed load): < 5 µs

Maximum Capacitive Load (for stable operation):

• Simulator/Table Mode: No Restriction
• Fixed Mode:  2000 µF

Load Lead Drop with Remote Sensing:

• Simulator/Table Mode: Up to 2 volts + (Voc – Vmp)
• Fixed Mode: Up to 2 volts total

Cur Sinking Capability:

• Simulator/Table Mode: 350 mA
• Fixed Mode: 420 mA

Voltage Programming Rise/Fall Time (time for output to change from 90% to 10% or 10% to 90% of its total excursion):  < 8 ms

Voltage Programming Settling Time (time for output change to settle within 0.1% of the rating of the unit; either 60 mV or 120 mV):  25 ms typical

Monotonicity: Output is monotonic over entire rated voltage, cur, temperature range

Auto-Parallel Configuration: Up to 4 outputs

Series and Shunt Switching Frequency (switching frequency is controlling by a customer-supplied external series or shunt FET connected to the output):  50 kHz maximum

Output Terminal Isolation (maximum, from chassis ground):  ±240 Vdc

• Maximum Power:  600 W
• Maximum Open Circuit Voltage (Voc): 130 V
• Maximum Voltage Point (Vmp): 120 V

Line Voltage 200 V / 230 V / 240 V:

• Maximum Short Circuit Cur (Isc) : 5.0 A

• Maximum Circuit Point (Imp): 5.0 A

Line Voltage: 100 V / 120 V:

• Maximum Short Circuit Cur (Isc) : 2.5 A
• Maximum Circuit Point (Imp) : 2.5 A

Maximum Power:  600 W

Maximum Open Circuit Voltage (Voc): 130 V

Maximum Voltage Point (Vmp): 120 V

Maximum Short Circuit Cur (Isc) : 5.0 A

Maximum Circuit Point (Imp): 5.0 A

Maximum Short Circuit Cur (Isc) : 2.5 A

Maximum Circuit Point (Imp) : 2.5 A

Voltage: 0 – 120 V

Line Voltage: 200 V / 230 V / 240 V:

• Cur: 0 – 5.0 A

Cur: 0 – 5.0 A

Line Voltage: 100 V / 120 V:

• Cur: 0 – 2.5 A

Cur: 0 – 2.5 A

• Simulator / Table Mode:
• 24 mVrms
• 195 mVp-p

• Fixed Mode (constant voltage):
• 30 mVrms
• 150 mVp-p

Simulator / Table Mode:

• 24 mVrms
• 195 mVp-p

24 mVrms

195 mVp-p

Fixed Mode (constant voltage):

• 30 mVrms
• 150 mVp-p

30 mVrms

150 mVp-p

• Fixed Mode Voltage: 0.075% + 50 mV
• Fixed Mode Cur: 0.2% + 10 mA

Fixed Mode Voltage: 0.075% + 50 mV

Fixed Mode Cur: 0.2% + 10 mA

• Voltage: 0.08% + 50 mV
• +Cur: 0.20% + 10 mA
• -Cur 0.35% + 24 mA

Voltage: 0.08% + 50 mV

+Cur: 0.20% + 10 mA

-Cur 0.35% + 24 mA

• Constant Voltage: 2 mV
• Constant Cur: 1 mA

Constant Voltage: 2 mV

Constant Cur: 1 mA

• Constant Voltage: 2 mV
• Constant Cur: 1 mA

Constant Voltage: 2 mV

Constant Cur: 1 mA

• Simulator/Table Mode:
• 4 mArms
• 32 mAp-p

• Fixed Mode (constant cur):
• 2.5 mArms
• 19 mAp-p

Simulator/Table Mode:

• 4 mArms
• 32 mAp-p

4 mArms

32 mAp-p

Fixed Mode (constant cur):

• 2.5 mArms
• 19 mAp-p

2.5 mArms

19 mAp-p

• Simulator/Table Mode Voltage: 0 – 130 V
• Fixed Mode Voltage: 0 – 123 V

Line Voltage: 200 V / 230 V / 240 V:

• Cur: 0 – 5.1 A

Line Voltage: 100 V / 120 V:

• Cur: 0 – 2.55 A
• Overvoltage Protection: 0 – 140 V
• Overcur Limit: 0 – 6.25 A

Simulator/Table Mode Voltage: 0 – 130 V

Fixed Mode Voltage: 0 – 123 V

Cur: 0 – 5.1 A

Cur: 0 – 2.55 A

Overvoltage Protection: 0 – 140 V

Overcur Limit: 0 – 6.25 A

• Voltage: 37 mV
• Cur: 1.6 mA
• Overvoltage Protection: 600 mV
• Overcur Limit: 27 mA

Voltage: 37 mV

Cur: 1.6 mA

Overvoltage Protection: 600 mV

Overcur Limit: 27 mA

• Overvoltage Protection: 1.2 V
• Overcur Limit: 0.5% + 215 mA
• Cur Monitor (referenced to P common): 1.0% + 75 mA

Overvoltage Protection: 1.2 V

Overcur Limit: 0.5% + 215 mA

Cur Monitor (referenced to P common): 1.0% + 75 mA

• Analog Programming: 1.0% + 3.2 mA
• +Ip to -Ip Diffeial Input (0 to full scale): 0 to -4 V
• Maximum Common Mode Voltage (referenced to +OUT): ±18 V
• Nominal Input Impedance: 20 kO

Analog Programming: 1.0% + 3.2 mA

+Ip to -Ip Diffeial Input (0 to full scale): 0 to -4 V

Maximum Common Mode Voltage (referenced to +OUT): ±18 V

Nominal Input Impedance: 20 kO

• Voltage: 0.04% + 2 mV
• Cur: 0.1% + 0.5 mA

Voltage: 0.04% + 2 mV

Cur: 0.1% + 0.5 mA

• Voltage 0.01% + 650 µV
• Cur 0.025% + 125 µA

Voltage 0.01% + 650 µV

Cur 0.025% + 125 µA

• Simulator/Table Mode: No Restriction
• Fixed Mode:  2000 µF

Simulator/Table Mode: No Restriction

Fixed Mode:  2000 µF

• Simulator/Table Mode: Up to 2 volts + (Voc – Vmp)
• Fixed Mode: Up to 2 volts total

Simulator/Table Mode: Up to 2 volts + (Voc – Vmp)

Fixed Mode: Up to 2 volts total

• Simulator/Table Mode: 350 mA
• Fixed Mode: 420 mA

Simulator/Table Mode: 350 mA

Fixed Mode: 420 mA

    

• Keysight (Agilent) E4362A - Datasheet (638 Ko)