Chroma 19036 Analyser The Chroma 19036 Wound Component Electrical Safety Test (EST) Analyser uniquely combines the functions of impulse test, hipot, insulation resistance and DC resistance measurements. It is suitable for testing large leakage cur or big electrical safety equipment and can perform safety tests on wound components like motors, transformers and solenoid valve to verify their quality. The Chroma 19036 as a comprehensive tester integrated with high power hipot test and other safety tests can bring the maximum benefit to the production line as well as to quality assurance.Features and Specifications of the Chroma 19036 Wound Component EST Analyser include:

Features:

• 10 Channels
• 5 in 1 composite Analyser:  ACWV, DCWV, IR, Impulse, DCR
• Hi-pot test:
• 5kVac / 6kVdc
• HSCC (High Speed Contact Check)
• 500 VA output
• Insulation Resistance test:
• 5kV Maximum
• Impulse Winding Test (IWT):
• 6kV impulse voltage
• High sampling rate (200MHz)
• DCR measurement:
• 4-wire DCR measurement
• Δ / Y motor winding calculation
• Support maximum 40 channels scanning test
• USB waveform storage & hard copy function
• Graphic color display
• Standard LAN, USB, RS232 interface
• GFI (Ground Fault Interrupt) for body protection
• Product Applications:
• From EV motors, servomotors, ascension motors to fans, all rotary motor products need to perform impulse test, hi-pot and DCR measurements to ensure product quality
• DCR measurement is in 4-wire type
• Each terminal has Drive and Sense
• 10 independent channels for scanning
• Can test 3 DUTs at once to increase productivity
• Each channel can be set to Hi/Lo/Open respectively

10 Channels

5 in 1 composite Analyser:  ACWV, DCWV, IR, Impulse, DCR

• Hi-pot test:
• 5kVac / 6kVdc
• HSCC (High Speed Contact Check)
• 500 VA output
• Insulation Resistance test:
• 5kV Maximum
• Impulse Winding Test (IWT):
• 6kV impulse voltage
• High sampling rate (200MHz)
• DCR measurement:

• 4-wire DCR measurement
• Δ / Y motor winding calculation

• Support maximum 40 channels scanning test
• USB waveform storage & hard copy function
• Graphic color display
• Standard LAN, USB, RS232 interface
• GFI (Ground Fault Interrupt) for body protection

Product Applications:

• From EV motors, servomotors, ascension motors to fans, all rotary motor products need to perform impulse test, hi-pot and DCR measurements to ensure product quality
• DCR measurement is in 4-wire type
• Each terminal has Drive and Sense
• 10 independent channels for scanning
• Can test 3 DUTs at once to increase productivity
• Each channel can be set to Hi/Lo/Open respectively

Hi-pot test:

• 5kVac / 6kVdc
• HSCC (High Speed Contact Check)
• 500 VA output

Insulation Resistance test:

• 5kV Maximum

Impulse Winding Test (IWT):

• 6kV impulse voltage
• High sampling rate (200MHz)

DCR measurement:

5kVac / 6kVdc

HSCC (High Speed Contact Check)

500 VA output

5kV Maximum

6kV impulse voltage

High sampling rate (200MHz)

• 4-wire DCR measurement
• Δ / Y motor winding calculation

4-wire DCR measurement

Δ / Y motor winding calculation

Support maximum 40 channels scanning test

USB waveform storage & hard copy function

Graphic color display

Standard LAN, USB, RS232 interface

GFI (Ground Fault Interrupt) for body protection

From EV motors, servomotors, ascension motors to fans, all rotary motor products need to perform impulse test, hi-pot and DCR measurements to ensure product quality

DCR measurement is in 4-wire type

Each terminal has Drive and Sense

10 independent channels for scanning

Can test 3 DUTs at once to increase productivity

Each channel can be set to Hi/Lo/Open respectively

Specifications:

• AC/DC Withstanding Test:
• Output Voltage:  
• AC: 0.05 – 5.0kV
• DC: 0.05 – 6.0kV  
• Load Regulation:  ≤ (1% of output+0.1% of full scale)
• Voltage Accuracy:  ± (1% of setting+0.1% of full scale)
• Voltage Resolution: 2V
• Cutoff Cur: 
• AC: 0.001mA – 120mA(Voltage≤4kV)
• AC: 0.001mA – 100mA(Voltage>4kV)
• DC: 0.0001mA – 20mA
• Cur Accuracy:  ± (1% of reading+0.5% of range) 
• Test Timer:  
• Test time:0.3 – 999 sec., and continue
• Ramp/ Fall/Dwell time:0.1 – 999 sec., and off
• Output Frequency:  50Hz / 60Hz (for AC)
• Waveform:  Sine wave (for AC)
• Insulation Resistance Test: 
• Output Voltage:  
• DC: 0.050 – 5.000kV
• Steps: 0.002kV
• Load Regulation:  ≤(1%of output+0.1%of full scale)
• Voltage Accuracy:  ±(1%of setting+0.1%of full scale)
• IR Range: 0.1MΩ – 50GΩ
• Resistance Accuracy: 
• >1kV:  
  • 1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)
  • 1GΩ – 10GΩ:  ±(7% of reading+2% of full range )
  • 10GΩ – 50GΩ:  ±(10% of reading+1% of full range)
• ≥0.5kV and ≤1kV:  
  • 0.1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)
  • 1GΩ – 10GΩ:  ±(7% of reading+2% of full range )
  • 10GΩ – 50GΩ:  ±(10% of reading+1% of full range)
• Impulse Winding Test:
• Applied Voltage:  0.5 – 6kV
• Step:  10V
• Energy: ,Max 0.21 Joules
• Induction Test Range: More than 10uH
• Sampling Speed:  10bit/ 5ns(200MHz)
• Sampling Range: 11 Ranges
• Pulse Number:
• Pulse Number: 1 – 32
• Dummy Pulse Number: 0 – 9
• Detection Mode: Area /Diffeial Area: Flutter/ Laplacian Detection
• DC Resistance Measurement:
• Test Signal:  
• Measurement Range:  0.1mΩ – 500kΩ
• Measurement Accuracy:
• 100m Ω: ± (0.5% of reading + 1% of full range)
• 1 Ω:  ± (0.5% of reading + 0.2% of full range)
• 10 Ω:  ± (0.5% of reading + 0.05% of full range)
• 100 Ω:  ± (0.5% of reading + 0.05% of full range)
• 1k Ω:  ± (0.5% of reading + 0.05% of full range)
• 10k Ω:  ± (0.5% of reading + 0.05% of full range)
• 100k Ω:  ± (0.5% of reading + 0.05% of full range)
• Flashover Detection:
• Detection Cur:  
• Programmable setting AC: 20mA
• Programmable setting DC: 10mA
• Contact Check Function:
• Contact Check:
• OSC (open/short check0
• HFCC (High Frequency Contact Check)
• HSCC (High Speed Contact Check; winding DCR check)
• Electrical Hazard Protection Function:
• Ground Fault Interrupt:  0.5mA±0.25mAAC,ON/OFF
• Key Lock:  Yes (password control)
• Interlock:  Yes
• Indication, Alarm:  
• Go: Short sound, Green LED
• NG: Long sound, Red LED
• Memory Storage:  200 sets, maximum 40 steps per set
• Interface:
• Standard:  RS232, Handler, USB, LAN interface

AC/DC Withstanding Test:

• Output Voltage:  
• AC: 0.05 – 5.0kV
• DC: 0.05 – 6.0kV  
• Load Regulation:  ≤ (1% of output+0.1% of full scale)
• Voltage Accuracy:  ± (1% of setting+0.1% of full scale)
• Voltage Resolution: 2V
• Cutoff Cur: 
• AC: 0.001mA – 120mA(Voltage≤4kV)
• AC: 0.001mA – 100mA(Voltage>4kV)
• DC: 0.0001mA – 20mA
• Cur Accuracy:  ± (1% of reading+0.5% of range) 
• Test Timer:  
• Test time:0.3 – 999 sec., and continue
• Ramp/ Fall/Dwell time:0.1 – 999 sec., and off
• Output Frequency:  50Hz / 60Hz (for AC)
• Waveform:  Sine wave (for AC)

Insulation Resistance Test: 

• Output Voltage:  
• DC: 0.050 – 5.000kV
• Steps: 0.002kV
• Load Regulation:  ≤(1%of output+0.1%of full scale)
• Voltage Accuracy:  ±(1%of setting+0.1%of full scale)
• IR Range: 0.1MΩ – 50GΩ
• Resistance Accuracy: 
• >1kV:  
  • 1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)
  • 1GΩ – 10GΩ:  ±(7% of reading+2% of full range )
  • 10GΩ – 50GΩ:  ±(10% of reading+1% of full range)
• ≥0.5kV and ≤1kV:  
  • 0.1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)
  • 1GΩ – 10GΩ:  ±(7% of reading+2% of full range )
  • 10GΩ – 50GΩ:  ±(10% of reading+1% of full range)

Impulse Winding Test:

• Applied Voltage:  0.5 – 6kV
• Step:  10V
• Energy: ,Max 0.21 Joules
• Induction Test Range: More than 10uH
• Sampling Speed:  10bit/ 5ns(200MHz)
• Sampling Range: 11 Ranges
• Pulse Number:
• Pulse Number: 1 – 32
• Dummy Pulse Number: 0 – 9
• Detection Mode: Area /Diffeial Area: Flutter/ Laplacian Detection

DC Resistance Measurement:

• Test Signal:  
• Measurement Range:  0.1mΩ – 500kΩ
• Measurement Accuracy:
• 100m Ω: ± (0.5% of reading + 1% of full range)
• 1 Ω:  ± (0.5% of reading + 0.2% of full range)
• 10 Ω:  ± (0.5% of reading + 0.05% of full range)
• 100 Ω:  ± (0.5% of reading + 0.05% of full range)
• 1k Ω:  ± (0.5% of reading + 0.05% of full range)
• 10k Ω:  ± (0.5% of reading + 0.05% of full range)
• 100k Ω:  ± (0.5% of reading + 0.05% of full range)

Flashover Detection:

• Detection Cur:  
• Programmable setting AC: 20mA
• Programmable setting DC: 10mA

• Contact Check Function:
• Contact Check:
• OSC (open/short check0
• HFCC (High Frequency Contact Check)
• HSCC (High Speed Contact Check; winding DCR check)
• Electrical Hazard Protection Function:
• Ground Fault Interrupt:  0.5mA±0.25mAAC,ON/OFF
• Key Lock:  Yes (password control)
• Interlock:  Yes
• Indication, Alarm:  
• Go: Short sound, Green LED
• NG: Long sound, Red LED
• Memory Storage:  200 sets, maximum 40 steps per set

Interface:

• Standard:  RS232, Handler, USB, LAN interface

Output Voltage:  

• AC: 0.05 – 5.0kV
• DC: 0.05 – 6.0kV  

Load Regulation:  ≤ (1% of output+0.1% of full scale)

Voltage Accuracy:  ± (1% of setting+0.1% of full scale)

Voltage Resolution: 2V

Cutoff Cur: 

• AC: 0.001mA – 120mA(Voltage≤4kV)
• AC: 0.001mA – 100mA(Voltage>4kV)
• DC: 0.0001mA – 20mA

Cur Accuracy:  ± (1% of reading+0.5% of range) 

Test Timer:  

• Test time:0.3 – 999 sec., and continue
• Ramp/ Fall/Dwell time:0.1 – 999 sec., and off

Output Frequency:  50Hz / 60Hz (for AC)

Waveform:  Sine wave (for AC)

AC: 0.05 – 5.0kV

DC: 0.05 – 6.0kV  

AC: 0.001mA – 120mA(Voltage≤4kV)

AC: 0.001mA – 100mA(Voltage>4kV)

DC: 0.0001mA – 20mA

Test time:0.3 – 999 sec., and continue

Ramp/ Fall/Dwell time:0.1 – 999 sec., and off

Output Voltage:  

• DC: 0.050 – 5.000kV
• Steps: 0.002kV

Load Regulation:  ≤(1%of output+0.1%of full scale)

Voltage Accuracy:  ±(1%of setting+0.1%of full scale)

IR Range: 0.1MΩ – 50GΩ

Resistance Accuracy: 

• >1kV:  
  • 1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)
  • 1GΩ – 10GΩ:  ±(7% of reading+2% of full range )
  • 10GΩ – 50GΩ:  ±(10% of reading+1% of full range)
• ≥0.5kV and ≤1kV:  
  • 0.1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)
  • 1GΩ – 10GΩ:  ±(7% of reading+2% of full range )
  • 10GΩ – 50GΩ:  ±(10% of reading+1% of full range)

DC: 0.050 – 5.000kV

Steps: 0.002kV

>1kV:  

• 1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)
• 1GΩ – 10GΩ:  ±(7% of reading+2% of full range )
• 10GΩ – 50GΩ:  ±(10% of reading+1% of full range)

≥0.5kV and ≤1kV:  

• 0.1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)
• 1GΩ – 10GΩ:  ±(7% of reading+2% of full range )
• 10GΩ – 50GΩ:  ±(10% of reading+1% of full range)

1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)

1GΩ – 10GΩ:  ±(7% of reading+2% of full range )

10GΩ – 50GΩ:  ±(10% of reading+1% of full range)

0.1MΩ – 1GΩ:  ±(3% of reading+0.1% of full range)

1GΩ – 10GΩ:  ±(7% of reading+2% of full range )

10GΩ – 50GΩ:  ±(10% of reading+1% of full range)

Applied Voltage:  0.5 – 6kV

Step:  10V

Energy: ,Max 0.21 Joules

Induction Test Range: More than 10uH

Sampling Speed:  10bit/ 5ns(200MHz)

Sampling Range: 11 Ranges

Pulse Number:

• Pulse Number: 1 – 32
• Dummy Pulse Number: 0 – 9

Detection Mode: Area /Diffeial Area: Flutter/ Laplacian Detection

Pulse Number: 1 – 32

Dummy Pulse Number: 0 – 9

Test Signal:  

Measurement Range:  0.1mΩ – 500kΩ

Measurement Accuracy:

• 100m Ω: ± (0.5% of reading + 1% of full range)
• 1 Ω:  ± (0.5% of reading + 0.2% of full range)
• 10 Ω:  ± (0.5% of reading + 0.05% of full range)
• 100 Ω:  ± (0.5% of reading + 0.05% of full range)
• 1k Ω:  ± (0.5% of reading + 0.05% of full range)
• 10k Ω:  ± (0.5% of reading + 0.05% of full range)
• 100k Ω:  ± (0.5% of reading + 0.05% of full range)

100m Ω: ± (0.5% of reading + 1% of full range)

1 Ω:  ± (0.5% of reading + 0.2% of full range)

10 Ω:  ± (0.5% of reading + 0.05% of full range)

100 Ω:  ± (0.5% of reading + 0.05% of full range)

1k Ω:  ± (0.5% of reading + 0.05% of full range)

10k Ω:  ± (0.5% of reading + 0.05% of full range)

100k Ω:  ± (0.5% of reading + 0.05% of full range)

Detection Cur:  

• Programmable setting AC: 20mA
• Programmable setting DC: 10mA

Programmable setting AC: 20mA

Programmable setting DC: 10mA

Contact Check Function:

• Contact Check:
• OSC (open/short check0
• HFCC (High Frequency Contact Check)
• HSCC (High Speed Contact Check; winding DCR check)

Electrical Hazard Protection Function:

• Ground Fault Interrupt:  0.5mA±0.25mAAC,ON/OFF
• Key Lock:  Yes (password control)
• Interlock:  Yes
• Indication, Alarm:  
• Go: Short sound, Green LED
• NG: Long sound, Red LED
• Memory Storage:  200 sets, maximum 40 steps per set

Contact Check:

• OSC (open/short check0
• HFCC (High Frequency Contact Check)
• HSCC (High Speed Contact Check; winding DCR check)

OSC (open/short check0

HFCC (High Frequency Contact Check)

HSCC (High Speed Contact Check; winding DCR check)

Ground Fault Interrupt:  0.5mA±0.25mAAC,ON/OFF

Key Lock:  Yes (password control)

Interlock:  Yes

Indication, Alarm:  

• Go: Short sound, Green LED
• NG: Long sound, Red LED

Memory Storage:  200 sets, maximum 40 steps per set

Go: Short sound, Green LED

NG: Long sound, Red LED

Standard:  RS232, Handler, USB, LAN interface

    

• Chroma 19036 - Datasheet (913 Ko)