Keithley 2290-10 Power Supply Keithley DC Power Supply, 100V to 10kV, 0 to 1mA The Keithley 2290-10 High Voltage Power Supplies facilitate high voltage device and material testing, as well as high energy physics experimentation. The Keithley 2290-10 provides 100V to 10,000V at 1mA. It measures both output voltage with 1V resolution and output cur with 1μA resolution. The Keithley 2290-10 additionally to the voltage and cur output displays, a third display shows one of four settings: output voltage, voltage limit, cur limit, or cur trip. These values can be set precisely with the front panel keypad, and can also be programmed over the GPIB interface, or the output voltage can be set with an analog control voltage. Low Noise Ensures Accurate Low Level Measurements Low output noise is essential when using sensitive measurement instruments to make leakage cur or high resistivity measurements. The maximum output ripple for the Keithley 2290-10 is less than 1VRMS. Extremely low noise from both power supplies enables sensitive measurement instruments to make accurate cur measurements down to picoamp levels. 2290-PM-200 Protection Module Protecting User and Instrumentation Series 2290 Power Supplies and a Model 2290: 2290-PM-200 Protection Module protect both user and instrumentation from hazardous voltages. An interlock circuit built into the power supplies can be used to ensure that the output voltage is disabled if a high voltage test fixture access door is open.Futhermore, all Series 2290 power supplies have low voltage analog outputs to permit safe monitoring of the high voltage and the output cur. When low voltage measurement instrumentation is used in the high voltage circuit, the protection module safely clamps the voltage across the instrument to a maximum value of 20V even when a device under test (DUT) breaks down. Thus, a Series 2290 Power Supply, 2290-PM-200 Protection Module, and Keithley accessories provide all the elements for building a safe, high voltage test environment. Make Precise Cur Measurements Lower Than 1μA Use a sensitive Keithley measurement instrument, such as a Keithley SourceMeter® Source Measure Unit (SMU) instrument, to measure cur drawn by the device under test (DUT) that is below the sensitivity of the Keithley 2290 Power Supplies. Keithley SourceMeter SMU instruments can provide sensitivity as low as 0.1fA. The 2290-PM-200 Protection Module protects the low voltage SourceMeter SMU instrument from high voltages when the DUT breaks down. The leakage cur of the protection module limits the measurement resolution to picoamp levels, which is five decades more sensitive than the cur measurement resolution of the Keithley Series 2290 Power Supplies. Keithley can provide a complete high voltage test capability with the most cur measurement sensitivity available anywhere. Easily Automate a High Voltage Test System The Series 2290’s GPIB interface allows the creation of an automated high voltage test system. Software drivers are supplied to simplify and accelerate test system development. This further enhances safety as the high voltage can be controlled from a remote location. The Keithley 2290-10 power supplies comply with the latest EU standards and are CE-certified. They’re most suited for high voltage device breakdown and component testing, insulation testing, high voltage resistivity measurements, and high energy physics research.Features and Specifications of Keithley Power Supply includes:

• Keithley 2290-10 - Datasheet (661 Ko)