Home » Tienda » Usado » EMC » Haefely PIM100

Haefely PIM100

Módulo de impulso de onda combinada, 1.2 / 50us y 8 / 20us

Fabricante:
Modelo: Haefely PIM100
Descripción: Módulo de impulso de onda combinada, 1.2 / 50us y 8 / 20us
Hoja de datos PDF: Haefely PIM100
Add to Quote Cart
Cart updated.
Continue shopping
or
go to your quote cart

Haefely PIM100 The Haefely PIM 100 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power lines. Single and three phase CDNs have multiplexed inputs, allowing up to 3 impulse modules to be connected. A full suite of test impulses can then be performed completely automatically and without the need to power down and reconnect the EUT.IEC 61000-4-5 and ANSI C62.41 describe a combination Wave or Hybrid generator with defined open AND short circuit waveforms. The Combination Wave is used to test AC and DC power systems.Safety is paramount with surge impulses. The Haefely PIM 100 High Voltage connections are all linked into the System Safety Concept which prevents high voltage plugs or cables from exposing operators to potentially lethal voltages. This concept is extended to Coupling/Decoupling Networks (CDNs) connected to the Haefely PIM100 output.The Haefely PSURGE8000 Surge Platform can perform all the programming functions required to perform IEC and ANSI testing without the need of a control computer. Voltage and Cur monitor circuits enable quick and easy verification of the impulse shape and amplitude. In addition, peak measurement circuits are used to help determine EUT PASS/FAIL criterion.The integration in the WinFEAT&R control and reporting software package enhances an efficient set-up and operation of this test system. Most importantly, the test load can be transferred to a computer freeing valuable resources.Features of the Haefely PIM100 Impulse Module Include:

  • Floating high voltage output
  • Combination wave 1.2/50us – 8/20us
  • 7.4kV impulse voltage
  • 3.7kA impulse cur
  • Impulse voltage & cur monitors
  • Accurate phase angle synchronisation

    • Highlights of the Haefely PIM 100 include:

  • International application – Specifically designed to meet and exceed the requirements of IEC, EN, and ANSI tests for power line applications.
  • Accurate Impulse Synchronisation – The PIM 100 impulses can be applied to the AC power wave with ±1° accuracy.
  • Safe and Easy – The interlocked HV section and the integrated controller allow your operators to test safely and easily.
  • Sturdy and Reliable – Careful component selection ensures that the PIM 100 will continue to operate under the most strenuous testing regime.
  • Report Generation – The unit can automatically generate test reports without a computer. Add WinFEAT&R control and reporting software to collect and collate data in any format you like.
  • Faster completion of testing program – The PIM 100 connects to an EUT via either a PCD 100 or 130. Both have multiplexed inputs, enabling testing to continue with other pulses without having to remove power from the EUT.

    • Applications include:

  • Single & Three phase power line systems
  • IEC 61000-4-5 Edition 1 and 2 Power & Data lines
  • ANSI C62.41 Power lines
  • Many IEC & EN Product standards
  • Other international requirements for Hybrid impulses

    • Specifications of the Haefely PIM100 include:

  • Impulse Voltage 0.20 – 7.4kV ±10%
  • Impulse Cur 0.10 – 3.7kA ±10%
  • Source Impedance 2 Ohms
  • Repetition @ Umax 10 seconds / 6 per minute
  • Line Synchronisation 1° steps ±1° @50Hz
  • Impulse front time V= 1.2us ±30% & I= 8us ±20%
  • Impulse duration V= 50us ±20% & I= 20us ±20%
  • Monitor Outputs BNC, volts(750/1) cur(400A/V)
  • Impulse Polarity Positive and Negative
  • Impulse Output HV connector with safety circuit

    •     

    • No resources found for given product name.

    Haefely PIM100 Product Overview

    No resources found for given product name.