Amplifier Research 40S6G18B The Amplifier Research 40S6G18B is a portable, self-contained, air-cooled, broadband, solid-state amplifier designed for applications that require instantaneous bandwidth, high gain and linearity. Features and Specifications of the Amplifier Research 40S6G18B40S6G18B Amplifier include:

Features:

• Provides a minimum of 40 watts of RF power instantaneously from 6 to 18 GHz when used with a sweep generator
• Digital Control Panel (DCP):
• Provides both local and remote control of the amplifier
• Uses a graphic Liquid Crystal Display:
• Provides gain settings
• Provides reports of internal amplifier status
• Uses menu assigned softkeys
• Uses a single rotary knob
• Uses a dedicated on/off switch
• Offers extensive control and status reporting capability
• Special features:
• Gain control
• Input overdrive protection
• All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
• Bus interface connection back panel
• Keylock on front panel assures positive control of local or remote operation
• Low spurious signals, linearity, and load tolerance make it ideal for these various uses:
• RF susceptibility testing
• Antenna/component testing
• Communication technology testing
• As a test instrument covering multiple frequency bands
• Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.

Specifications:

• Rated power output:  40 watts minimum
• Power output @ 3dB compression:
• Nominal:  46 watts
• Minimum:  35 watts
• Power output @ 1dB compression:
• Nominal:  30 watts
• Minimum:  22 watts
• Flatness:
• typical:  ±2.0 dB
• maximum:  ±3.0 dB
• Frequency response:  6 – 18 GHz instantaneously
• Input for rated output:  1.0 milliwatt maximum, 0 dBm
• Gain (at maximum setting):  46 dB minimum
• Gain adjustment (continuous range):  10 dB minimum
• Input impedance:  50 ohms, VSWR 2.5:1 maximum
• Output impedance:  50 ohms, nominal
• Mismatch tolerance:  
• 100% of rated power without foldback
• Will operate without damage or oscillation with any magnitude and phase of source and load impedance
• Modulation capability:  Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
• Harmonic distortion:  Minus 20 dBc maximum at 40 watts
• Third order intercept point:  52 dBm typical
• Primary power (selected automatically): 
• 90-132, 180-264VAC
• 50/60 Hz, single phase
• Connectors:
• RF input:  Precision N female, rear
• RF output:  Precision N female, rear
• Remote interfaces:
• IEEE-488:  24 pin female
• RS-232:  9 pin Subminiature D (female)
• RS-232 (fiber-optic):  Type ST
• USB 2.0:  Type B
• Ethernet:  RJ-45
• Safety interlock:  15 pin Subminiature D
• Cooling:  Forced air (self contained fans)

Provides a minimum of 40 watts of RF power instantaneously from 6 to 18 GHz when used with a sweep generator

Digital Control Panel (DCP):

• Provides both local and remote control of the amplifier
• Uses a graphic Liquid Crystal Display:
• Provides gain settings
• Provides reports of internal amplifier status
• Uses menu assigned softkeys
• Uses a single rotary knob
• Uses a dedicated on/off switch
• Offers extensive control and status reporting capability

Special features:

• Gain control
• Input overdrive protection

All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet

Bus interface connection back panel

Keylock on front panel assures positive control of local or remote operation

Low spurious signals, linearity, and load tolerance make it ideal for these various uses:

• RF susceptibility testing
• Antenna/component testing
• Communication technology testing
• As a test instrument covering multiple frequency bands
• Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.

Provides both local and remote control of the amplifier

Uses a graphic Liquid Crystal Display:

• Provides gain settings
• Provides reports of internal amplifier status

Uses menu assigned softkeys

Uses a single rotary knob

Uses a dedicated on/off switch

Offers extensive control and status reporting capability

Provides gain settings

Provides reports of internal amplifier status

Gain control

Input overdrive protection

RF susceptibility testing

Antenna/component testing

Communication technology testing

As a test instrument covering multiple frequency bands

Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.

Rated power output:  40 watts minimum

Power output @ 3dB compression:

• Nominal:  46 watts
• Minimum:  35 watts

Power output @ 1dB compression:

• Nominal:  30 watts
• Minimum:  22 watts

Flatness:

• typical:  ±2.0 dB
• maximum:  ±3.0 dB

Frequency response:  6 – 18 GHz instantaneously

Input for rated output:  1.0 milliwatt maximum, 0 dBm

Gain (at maximum setting):  46 dB minimum

Gain adjustment (continuous range):  10 dB minimum

Input impedance:  50 ohms, VSWR 2.5:1 maximum

Output impedance:  50 ohms, nominal

Mismatch tolerance:  

• 100% of rated power without foldback
• Will operate without damage or oscillation with any magnitude and phase of source and load impedance

Modulation capability:  Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal

Harmonic distortion:  Minus 20 dBc maximum at 40 watts

Third order intercept point:  52 dBm typical

Primary power (selected automatically): 

• 90-132, 180-264VAC
• 50/60 Hz, single phase

Connectors:

• RF input:  Precision N female, rear
• RF output:  Precision N female, rear
• Remote interfaces:
• IEEE-488:  24 pin female
• RS-232:  9 pin Subminiature D (female)
• RS-232 (fiber-optic):  Type ST
• USB 2.0:  Type B
• Ethernet:  RJ-45

Safety interlock:  15 pin Subminiature D

Cooling:  Forced air (self contained fans)

Nominal:  46 watts

Minimum:  35 watts

Nominal:  30 watts

Minimum:  22 watts

typical:  ±2.0 dB

maximum:  ±3.0 dB

100% of rated power without foldback

Will operate without damage or oscillation with any magnitude and phase of source and load impedance

90-132, 180-264VAC

50/60 Hz, single phase

RF input:  Precision N female, rear

RF output:  Precision N female, rear

Remote interfaces:

• IEEE-488:  24 pin female
• RS-232:  9 pin Subminiature D (female)
• RS-232 (fiber-optic):  Type ST
• USB 2.0:  Type B
• Ethernet:  RJ-45

IEEE-488:  24 pin female

RS-232:  9 pin Subminiature D (female)

RS-232 (fiber-optic):  Type ST

USB 2.0:  Type B

Ethernet:  RJ-45

    

• Amplifier Research 40S6G18B - Datasheet (1 MB)