0 items - €0.00
0
- No hay productos en el carrito.
Amplifier Research 120S4G8
Amplificador de RF 4 – 8 GHz 120W
| Fabricante: | |
| Modelo: | Amplifier Research 120S4G8 |
| Descripción: | Amplificador de RF 4 - 8 GHz 120W |
| Hoja de datos PDF: | Amplifier Research 120S4G8 |
|
|
|
Amplifier Research 120S4G8 The Amplifier Research 120S4G8 is a self-contained, air-cooled, broadband, solid-state amplifier designed for applications that require instantaneous bandwidth, high gain and linearity. Features and Specifications of the Amplifier Research 120S4G8 include:
- Provides a minimum of 120 watts of RF power when used with a sweep generator
- Digital Control Panel (DCP):
- Provides both local and remote control of the amplifier
- Uses a graphic liquid Crystal Display:
- Provides operational presentation of forward power and reflected power
- Provides control status
- Provides reports of internal amplifier status
- Uses menu assigned softkeys
- Uses a single rotary knob
- Uses a dedicated on/off switch
- Offers extensive control and status reporting capability
- Special features:
- Gain control
- Internal/external automatic level control (ALC) with front panel control of the ALC threshold
- Pulse input capability
- RF output level protection
- Internal RF detector which provides an output for use in self-testing or operational modes
- All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
- Bus interface connectoron back panel
- Keylock on front panel assures positive control of local or remote operation
- Low spurious signals, linearity, and load tolerance make it ideal for these various uses:
- RF susceptibility testing
- Antenna/component testing
- Communication technology testing
- As a test instrument covering multiple frequency bands
- Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.
- Expandable power and versatility:
- Consists of four 35S4G8 sub-amplifiers housed in a singe equipment rack with controller
- Can function as one amplifier
- Can be separated into four separate 35S4G8 amplifiers which can be used independently
- Rated power output: 120 watts minimum
- Power output @ 3dB compression:
- Nominal: 135 watts
- Minimum: 120 watts
- Power output @ 1dB compression:
- Nominal: 120 watts
- Minimum: 100 watts
- Flatness:
- ±1.5 dB typical
- ±2.5 dB maximum
- Frequency response: 4.0 – 8.0 GHz instantaneously
- Input for rate output: 1.0 milliwatt maximum, 0 dBm
- Gain (at maximum setting): 50.8 dB minimum
- Gain adjustment (continuous range): 15 dB minimum
- Input impedance: 50 ohms, VSWR 2.5:1 maximum
- Output impedance: 50 ohms, nominal
- Mismatch tolerance:
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- Harmonic distortion: Minus 20 dBc maximum at 120 watts
- Third order intercept point: 58 dBm typical
- RF power display: Digital, forward and reflected
- Primary power:
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- Connectors:
- RF Input: Type N female on front panel
- RF Output: Type N female on rear panel
- External leveling inputs: Type BNC female on front panel
- Pulse modulation input: Type BNC female on front panel
- Detected RF output: Type BNC female on front panel
- Remote interfaces:
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- Safety Interlock: 15 Pin Subminiature D
- Cooling: Forced air (self contained fans)
- Provides both local and remote control of the amplifier
- Uses a graphic liquid Crystal Display:
- Provides operational presentation of forward power and reflected power
- Provides control status
- Provides reports of internal amplifier status
- Uses menu assigned softkeys
- Uses a single rotary knob
- Uses a dedicated on/off switch
- Offers extensive control and status reporting capability
- Gain control
- Internal/external automatic level control (ALC) with front panel control of the ALC threshold
- Pulse input capability
- RF output level protection
- RF susceptibility testing
- Antenna/component testing
- Communication technology testing
- As a test instrument covering multiple frequency bands
- Suitable for communication technologies including CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.
- Consists of four 35S4G8 sub-amplifiers housed in a singe equipment rack with controller
- Can function as one amplifier
- Can be separated into four separate 35S4G8 amplifiers which can be used independently
- Provides operational presentation of forward power and reflected power
- Provides control status
- Provides reports of internal amplifier status
- Nominal: 135 watts
- Minimum: 120 watts
- Nominal: 120 watts
- Minimum: 100 watts
- ±1.5 dB typical
- ±2.5 dB maximum
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- RF Input: Type N female on front panel
- RF Output: Type N female on rear panel
- External leveling inputs: Type BNC female on front panel
- Pulse modulation input: Type BNC female on front panel
- Detected RF output: Type BNC female on front panel
- Remote interfaces:
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
Amplifier Research 120S4G8 - Datasheet (54 KB)