It’s a known fact: optical network problems are often caused by dirty and/or damaged connectors. Using a fiber inspection probe to ensure connectors/adapters are clean and exempt of any defect is where accurate testing starts. Thanks to EXFO’s FIP-400-dual Fiber Inspection Probe, checking connectors and other fiber terminations for polish quality and cleanliness has never been easier. The key features of the EXFO FIP-400-dual includes magnification, manual operation, compatibility with EXFO’s legacy products, and EXFO probe port connector type (8 pin mini-DIN).

Here is the full spec list of the fiber inspection probe FIP-400-dual:

• Size (H x W x D): without tip cap 38 mm x 32 mm x 170 mm (1 ? in x 1 ? in x 6 11/16 in) with tip cap 38 mm x 32 mm x 200 mm (1 ? in x 1 ? in x 7 ? in)
• Weight: 0.2 kg (0.44 lb.)
• Resolution: Theoretical < 2 ?m, detection capability < 1 ?m
• Field of view: 625 ?m x 464 ?m (low magnification) 412 ?m x 306 ?m (high magnification)
• Light source: Blue LED
• Lighting technique: Coaxial
• Capture button: Present on all models
• Connector: EXFO probe port type (8 pin mini-DIN)
• Focus control: Adjustable on the probe
• Optical magnification: Adjustable, low and high (dual model only)

Benefit from the best optical resolution in the industry and see scratches and dirt particles as small as 1 ?m. The EXFO FIP-400 dual is available refurbished with warranty from Testwall. Request a quote today.

• Exfo FIP-400-DUAL - EXFO_FIP-400-DUAL_Spec (513 KB)