Home » Geschäft » Gebraucht » Power-Analysatoren » Associated Research OMNIA II 8254

Associated Research OMNIA II 8254

Konformitätsanalysator für elektrische Sicherheit, 4-in-1 500 VA

Hersteller:
Modell: Associated Research OMNIA II 8254
Beschreibung: Konformitätsanalysator für elektrische Sicherheit, 4-in-1 500 VA
Datenblatt PDF: Associated Research OMNIA II 8254
Add to Quote Cart
Cart updated.
Continue shopping
or
go to your quote cart

Associated Research OMNIA II 8254 ELECTRICAL SAFETY COMPLIANCE Analyser The Associated Research OMNIA II 8254 Electrical Safety Compliance Analyser provides AC Hipot, DC Hipot, Insulation Resistance, and Ground Bond / Continuity tests in a single DUT connection. An optional built-in 8 port scanner is available on the OMNIA II 8254. Designed around the way you test, the OMNI II 8254 is unique as your application and provides you with customizable features and unmatched functionality.Features and Specifications of the Associated Research OMNIA II 8254 Electrical Safety Compliance Analyser include:Features:

  • Comes standard with an USB/RS-232 interface
  • Available with optional Ethernet or GPIB
  • Color TFT display that makes setting up test files, viewing results and performing tests easier than ever
  • Customizable My Menu Interface
  • DualCHEK® simultaneous ground bond and hipot tests
  • Interconnection to scanning matrix
  • Storage of up to 10,000 test steps
  • Patented SmartGFI® function
  • Patented prompt and hold function
  • Patented CAL-ALERT® function 
  • Patented VERI-CHECK® function
  • CHARGE LO® & RAMP HI®
  • 40-Amp ground bond
  • Dual function ground bond and ground continuity
  • Built-in real cur measurement
  • 4-Wire measurement
  • AC/DC Hipot leakage cur offset
  • Meets 200 mA short circuit requirements
  • True RMS cur readings

    • Specifications:

  • Input:
    • Voltage:  115 / 230V auto-range, ± 15% variation
    • Frequency:  50/60 Hz ± 5%
    • Fuse:  115 VAC, 230VAC – 10A Slow-Blo 250VAC
  • Test functionality:  
    • 5 kV 100 mAAC Hipot (500VA)
    • 5 kV 20 mADC Hipot
    • Insulation Resistance 
    • 40 Amp Ground Bond
  • General Specifications:  
    • PLC Remote Control:
      • Input:  Test, Reset, Interlock, Recall File 1 through 3
      • Output:  Pass, Fail, Test-in-Process
    • Safety:  Built-in Smart GFI circuit
    • Memory:  10,000 steps
    • Interface:  Standard USB/RS-232, Ethernet, or GPIB  
    • Security:  Advanced security system with access levels and username/password requirements
    • Alarm Volume Setting:  
      • Range:  0-9
        • 0 = OFF
        • 1 is softest volume and 9 is loudest volume
    • Calibration:
      • Adjustments are made through the front panel
      • Automatic calibration alert function to signal operator when calibration is due
    • Mechanical:  Bench or rack mount with tilt up front teeth
  • Voltage:  115 / 230V auto-range, ± 15% variation
  • Frequency:  50/60 Hz ± 5%
  • Fuse:  115 VAC, 230VAC – 10A Slow-Blo 250VAC
  • 5 kV 100 mAAC Hipot (500VA)
  • 5 kV 20 mADC Hipot
  • Insulation Resistance 
  • 40 Amp Ground Bond
  • PLC Remote Control:
    • Input:  Test, Reset, Interlock, Recall File 1 through 3
    • Output:  Pass, Fail, Test-in-Process
  • Safety:  Built-in Smart GFI circuit
  • Memory:  10,000 steps
  • Interface:  Standard USB/RS-232, Ethernet, or GPIB  
  • Security:  Advanced security system with access levels and username/password requirements
  • Alarm Volume Setting:  
    • Range:  0-9
      • 0 = OFF
      • 1 is softest volume and 9 is loudest volume
  • Calibration:
    • Adjustments are made through the front panel
    • Automatic calibration alert function to signal operator when calibration is due
  • Mechanical:  Bench or rack mount with tilt up front teeth
  • Input:  Test, Reset, Interlock, Recall File 1 through 3
  • Output:  Pass, Fail, Test-in-Process
  • Range:  0-9
    • 0 = OFF
    • 1 is softest volume and 9 is loudest volume
  • 0 = OFF
  • 1 is softest volume and 9 is loudest volume
  • Adjustments are made through the front panel
  • Automatic calibration alert function to signal operator when calibration is due

    •     

    Associated Research OMNIA II 8254 Product Overview