Home » Geschäft » Gebraucht » Verstärker » Amplifier Research 300TR7Z5G18

Amplifier Research 300TR7Z5G18

HF-Verstärker 7,5 – 18 GHz 300W

Hersteller:
Modell: Amplifier Research 300TR7Z5G18
Beschreibung: HF-Verstärker 7,5 - 18 GHz 300W
Datenblatt PDF: Amplifier Research 300TR7Z5G18
Add to Quote Cart
Cart updated.
Continue shopping
or
go to your quote cart

AR 300TR7z5G18 (call for availability)The Amplifier Research (AR) 300TR7z5G18 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for applications where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 300 watts minimum at the amplifier output flange over most of the frequency range. Stated power specifications are at the fundamental frequency. The AR 300TR7z5G18 Amplifier’s front panel digital display shows forward and reflected output plus extensive system status information accessed through a series of menus via soft keys. Status indicators include power on, warm-up, standby, operate, faults, excess reflected power warning and remote. Standard features include a built-in IEEE-488 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, plus monitoring of TWT helix cur, cathode voltage, collector voltage, heater cur, heater voltage, baseplate temperature and cabinet temperature. The modular design of the AR 300TR7z5G18 Amplifier’s power supply and RF components allow for easy access and repair. Use of a switching mode power supply results in significant weight reduction. The AR 300TR7z5G18 Amplifier is designed for 19 inch rack mounting, offers four side mounted carry handles, plus non-slip feet for bench top use. The AR 300TR7z5G18 Amplifier provides readily available RF power for a variety of applications in Test and Measurement, (including EMC RF susceptibility testing), Industrial and University Research and Development, and Service applications. Contact AR RF/Microwave Instrumentation for information on other models with alternative packaging and features.Features and Specifications of the AR 300TR7z5G18 Amplifier include:

  • Power (fundamental), CW, @ Output Flange:
    • Nominal: 350 watts
    • Minimum: 285 watts 7.5–8GHz, 300 watts 8–18GHz
  • Flatness:  ±12 dB maximum
  • Frequency Response: 7.5 – 18 GHz instantaneously
  • Input for Rated Output: 1.0 milliwatt maximum
  • Gain (at maximum setting): 55 dB minimum
  • Gain Adjustment (continuous range): 35 dB minimum
  • Input Impedance: 50 ohms, VSWR 2.0:1 maximum
  • Output Impedance: 50 ohms, VSWR 2.5:1 typical
  • Mismatch Tolerance: Output power fold back protection at reflected power exceeding 60 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
  • Modulation Capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
  • Noise Power Density: Minus 65 dBm/Hz maximum, Minus 70 dBm/Hz typical
  • Harmonic Distortion: Minus 2 dBc maximum, minus 5 dBc typical
  • Primary Power: 190-260 VAC, 50/60 Hz single phase, 2 KVA maximum
  • Connectors:
    • RF input: Type N precision female on rear panel
    • RF output: Type WRD –750D24 waveguide flange on rear panel
    • RF output sample port: Type N precision female on rear panel
    • GPIB: IEEE-488 (f) on rear panel
    • Interlock: DB-15 (f) on rear panel
  • Cooling: Forced air (self-contained fans), air entry and exit in rear.
  • Nominal: 350 watts
  • Minimum: 285 watts 7.5–8GHz, 300 watts 8–18GHz
  • RF input: Type N precision female on rear panel
  • RF output: Type WRD –750D24 waveguide flange on rear panel
  • RF output sample port: Type N precision female on rear panel
  • GPIB: IEEE-488 (f) on rear panel
  • Interlock: DB-15 (f) on rear panel

    •       

    Amplifier Research 300TR7Z5G18 Product Overview